TESSCO Technologies
Your Total Source®
Consolidate Purchases | Lower Total Costs Need Help? Call (800) 472-7373

Order Now
Products and Solutions to Support the Building, Operating and Using of Mobile, Fixed and In-Building Wireless Systems.

Registered Users: Log In

Log In
Remember Me Forgot Password?
For Full Access, Register Now | Why?
TestPad 2000-V6 Color UIM

TestPad 2000-V6 Color UIM

JDSU/ACTERNA FST-2000 TestPad & Access.

Mfg: JDSU
Mfg Part #: 80-50368-01
TESSCO SKU: 415563
Qty/UOM: 1 EACH

List :$3505.00

Qty:  Add to Worksheet
Product Advisory Must order application module. For use with newer appl module (purple casing). *This item is not a Typically Stocked Item, and will be ordered specially for you. Please allow for extended delivery. As a special order, the order is non-cancellable and the item is not available for return under the TESSCO No-Risk 30 Day Inspection policy.
 


The Acterna FST-2000 TestPad is the user interface for the Acterna 2000 test platform. The combination of a user interface and an application module represents a complete test tool. This architecture provides users with the flexibility to invest in additional test modules as their needs change, allowing them to capitalize on an investment already made. Its lightweight, rugged construction, an easily accessible field-replaceable battery, and application modules that easily plug into the TestPad 2000 at the job site allow field technicians to conduct accurate tests under all conditions.

FEATURES AND BENEFITS:
  • Modular TestPad 2000 architecture enables up-to-date support in a single platform
  • Comprehensive testing solution for multiple network applications and technologies
  • Easy-to-use, touch-screen graphical user interface (GUI) simplifies and expedites testing
  • Identical user interface for all applicable TestPad application modules
  • Remote, VT100 & Web Browser capabilities
  • Variety of connectivity methods: RS-232, USB, Ethernet, Bluetooth (tm), 802.11, analog & wireless modems
  • Dual PCMCIA slots support easy field installation of software and future upgrades
  • Field Upgradeable Software Options for the 2000 test platform via PCMCIA card
  • Application/Service Modules Are Required. Supported Application/Service Modules Include: (2207/09) T1/T3 DS1/DS3, (2109) Copper Analyzer, (2357) DSL Broadband, (2310) SONET, (2416) SDH, and (2510) 10-Gig Services Modules
 

STANDARD ACCESSORIES INCLUDED:
  • User Manual, Soft Case
  • Serial Cable, AC Adapter/Charger

AVAILABLE OPTIONS:
  • Advanced Stress Patterns - ASP: Transmit and receive fixed long patterns beyond standard patterns T1 patterns are designed to stress test the timing recovery circuits and span-line repeater ALBO circuitry
  • Fractional T1 - FT1: Contiguous and noncontiguous, 56KxN and 64KxN, FT1 testing capabilities, qualification and testing of new FT1 circuits before connecting equipment, V.54 FT1 loopcode allows single set testing of FT1 circuits from T1 access point
  • VF PCM -TIM: Listen PCM encoded signals with built-in speader and no-intrusive monitor signals with two T1 receivers, measure VF tone and level transmit tones on individual PCM channel basis, variable frequency/level tones transmitted, noise measure
  • Signaling - SIG: Ability of PBX/Switch to handle incoming calls, receive and monitor calls over several trunk types, send/receive DTMF digits to/from switches and PBX, dial-up VF circuits, measure inter-delay and digit/tone duration
  • Primary Rate ISDN - PRI: Place and receive multiple voice/data calls, D-channel backup, support NFAS, support multiple call types 56K, 64K, Nx56 and HO
  • Terminal Emulation - VT100: Enables user to switch from BER to VT100 terminal Emulation monitor or provision network elements performance monitoring NIUs or HDSL terminal units via RS-232
  • Intelligent Line Equipment - ILE: Provides loop up and down individual T1 addressing repeaters, line repeaters, transmit switch commands, loop up and down HDSL, supports T1 equipment
  • GSM: Monitor voice conversations and service statitics from a T1 access point without disturbing traffic to verify the ABIS interface between the base station transceiver station (BTS) and the base station controller (BSC)

DescriptionFST-2000 TestPad V6 version. Includes: AC adapter/charger, and printer cable, Application Module REQUIRED. Case sold separately
Technology SupportedT1/DS1/DS3/GSM/DSL/SONET/SDH/TIMS
Product NarrativeThe Acterna FST-2000 TestPad is the user interface for the Acterna 2000 test platform. The combination of a user interface and an application module represents a complete test tool. This architecture provides users with the flexibility to invest in additional test modules as their needs change, allowing them to capitalize on an investment already made. Its lightweight, rugged construction, an easily accessible field-replaceable battery, and application modules that easily plug into the TestPad 2000 at the job site allow field technicians to conduct accurate tests under all conditions.
Advise CustomerMust order application module. For use with newer appl module (purple casing). *This item is not a Typically Stocked Item, and will be ordered specially for you. Please allow for extended delivery. As a special order, the order is non-cancellable and the item is not available for return under the TESSCO No-Risk 30 Day Inspection policy.
Mfg. Warranty1 Year

Clicking on a link will search for accessories by the brand and model