In-Building Amplifiers, Repeaters, Bi-Directional Amplifier Accessories

Advanced
Search

Products and Solutions to Support the Building, Operating and Using of Mobile, Fixed and In-Building Wireless Systems.

Registered Users: Log In

For Full Access, Register Now | Why?

In-Building Amplifiers, Repeaters: Bi-Directional Amplifier Accessories [457-32]

Wi-Ex RF Signal Meter

Designed for installers, the zBoost RF signal meter reads the signal level for best placement of an antenna or aiming of a directional antenna. In addition, it will help the installer identify the signal strength and variation inside the building to aid in the placement of the internal antenna. It is designed to operate in the CELL and PCS bands only. Display is switchable between a 0-99 relative signal strength graph and an exact -99dBm to -10dBm reading. The zBoost PSM kit includes - the meter, SMA male to F male cable, antenna and AC power supply. Can also operate off of 3 AA batteries (Batteries not included).

Detects best location for antenna - Reads RF signal strength	Identifies peak antenna alignment - Attach to yagi or panel antenna to read signal strength from various directions
Easy to use - just add batteries and start reading signal strength	Small footprint and lightweight
Dual band works with most carriers at both Cellular and/or PCS (excluding Nextel or iDEN)	Gives reading of strongest signal within frequency range - Cannot differentiate between carriers or display frequency being received

Item#
Qty/Uom

Manufacturer
Mfg. Part No.
Mfg. Warranty

Description

Wt. (lbs)
Wgt. (kg.)

Price
Log in For
Your Price

372255
1 EACH

Wi-Ex
YX699-PCS-CEL
90 days

ZBoost RF signal meter.

0.62
0.28

List

$199.00

CSI 800 MHz SMR Re-Banding Filters

Cellular Specialties has desgned a line of dual filters to address the change in frequency requirements for areas where the 800 MHz spectrum has been re-banded. Exisitng 806-824 & 851-869 MHz BDA's do not have to be replaced. By placing one of these filters between the antenna and the repeater, only the new, re-banded frequencies will pass through. One filter narrows the passband to 7 MHz for re-banded Nextel systems. Another filter passes 10MHz to accommodate the new NPSPAC, public safety band and the re-banded conventional SMR band.

Item#
Qty/Uom

Manufacturer
Mfg. Part No.
Mfg. Warranty

Description

Wt. (lbs)
Wgt. (kg.)

Price
Log in For
Your Price

384016
1 EACH

Cellular Specialties
FLTR3NF10807/852
1 Year

806-809 & 851-854 MHz dual bandpass filter for re-banded NPSPAC public safety frequencies.

3.65
1.66

List

$891.00

304416
1 EACH

Cellular Specialties
FLTR10NF10806/851
1 Year

806-816 & 851-861 MHz dual bandpass filter for re-banded NPSPAC public safety and conventional SMR frequencies.

3.52
1.60

List

$891.00

314030
1 EACH

Cellular Specialties
FLTR7NF10820/865
1 Year

809-816 & 854-861 MHz dual bandpass filter for re-banded conventional SMR frequencies.

3.52
1.60

List

$891.00

344265
1 EACH

Cellular Specialties
FLTR7NF10-817/862
1 Year

817-824 & 862-869 MHz dual bandpass filter for re-banded Nextel systems.

3.38
1.54

List

$891.00

334046
1 EACH

Cellular Specialties
FLTR3NF10822/867
1 Year

821-824 & 866-869 MHz dual bandpass filter for pre-rebanded NPSPAC public safety frequencies.

3.52
1.60

List

$891.00

Power Supplies

Andrew in-building repeaters require the use of separately purchased power supplies. Use sku 390654 for single band units and sku 350753 for dual band units.

Item#
Qty/Uom

Manufacturer
Mfg. Part No.
Mfg. Warranty

Description

Wt. (lbs)
Wgt. (kg.)

Price
Log in For
Your Price

350753
1 EACH

Andrew Solutions
7500537
1 Year

12VDC power supply for use with the Andrew MR series dual band RF repeaters.

2.35
1.07

List

$175.00

390654
1 EACH

Andrew Solutions
7162524
1 Year

7.5VDC power supply for use with the Andrew MR series single band RF repeaters.

1.57
0.71

List

$100.00

344254
1 EACH

Andrew Solutions
7565924
1 Year

6VDC, 70 watt power supply for use with the Andrew MRx18 series single band RF repeaters. 100-240VAC input.

2.51
1.14

List

$100.00

Wi-Ex 75 Ohm Antennas

The Wi-Ex line of bi-directional amplifiers requires the use of 75 ohm antennas and cable for the donor side of the amplifier. Choose one of the antennas below based on frequency and gain required. See the Transmission Line Section for our selection of 75 Ohm cables and type F connectors.

Item#
Qty/Uom

Manufacturer
Mfg. Part No.
Mfg. Warranty

Description

Wt. (lbs)
Wgt. (kg.)

Price
Log in For
Your Price

310348
1 EACH

Wi-Ex
YX022-CEL
1 Year

824-896 MHz 6dBi omnidirectional fiberglass antenna. 75 ohm type F female termination.

2.62
1.19

List

$148.00

310071
1 EACH

Wi-Ex
YX025-CEL
1 Year

824-896 MHz 5 element directional yagi antenna. 7dBi gain. 15.375" long x 7.675" wide x 1.5" deep. Fits on masts up to 1 5/8" diameter. 75 ohm type F male termination on short jumper.

1.72
0.78

List

$88.00

350544
1 EACH

Wi-Ex
YX026-CEL
1 Year

824-896 MHz 12 element directional yagi antenna. 11dBi gain. 34.25" long x 7.5" wide x 1.5" deep. Fits on masts up to 1 5/8" diameter. 75 ohm type F male termination on short jumper.

2.30
1.05

List

$98.00

310577
1 EACH

Wi-Ex
YX055-CEL
1 Year

824-896 MHz 18 element directional yagi antenna. 15dBi gain. 63" long x 7.5" wide x 1.5" deep. Fits on masts up to 1 5/8" diameter. 75 ohm type F female termination on short jumper.

2.82
1.28

List

$148.00

320202
1 EACH

Wi-Ex
YX029-PCS-CEL
1 Year

824-896/1850-1990 MHz dual band directional antenna array. Consists of a cellular yagi and a PCS panel antenna joined by a coupler with a single, 75 Ohm F female output. 7dBi cellular & 14dBi PCS gain. Fits on masts up to 1 5/8" diameter.

4.91
2.23

List

$218.00

330734
1 EACH

Wi-Ex
YX023-PCS
1 Year

1850-1990 MHz outdoor panel antenna. 13dBi gain. Fits on masts up to 2.5"OD with included hardware. F female connector on the rear of antenna. 7.25"L x 6"W x 2"D.

2.24
1.02

List

$98.00

CSI External Modems

Cellular Specialties offers external modem kits for use with any of their DSP digital repeaters. Choose between CDMA and GSM versions.

Item#
Qty/Uom

Manufacturer
Mfg. Part No.
Mfg. Warranty

Description

Wt. (lbs)
Wgt. (kg.)

Price
Log in For
Your Price

301482
1 EACH

Cellular Specialties
CSIDSPMOD-EK/CDMA
1 Year

External modem kit for use in CDMA systems.

1.13
0.51

List

$1145.00

321850
1 EACH

Cellular Specialties
CSIDSPMOD-EK/GPRS
30 Days

External modem kit for use in GSM systems.

1.13
0.51

List

$1145.00

Spotwave Outdoor Mounting Kits

When the Spotwave donor antenna is mounted outdoors, the system requires additional lightning protection componets that are included in the outdoor installation kit along with an extra angle mount, grounding block and U-bolts.

Item#
Qty/Uom

Manufacturer
Mfg. Part No.
Mfg. Warranty

Description

Wt. (lbs)
Wgt. (kg.)

Price
Log in For
Your Price

441994
1 EACH

Spotwave Wireless
100-10101-01
1 Year

Outdoor mounting kit for the 2500Xe series repeaters.

1.56
0.71

List

$50.00

2500Xe Ceiling Mount Kit

The 2500Xe CU ceiling mount kit is used to hang the CU directly from a ceiling. This kit replaces the standard CU mounting bracket with a metal bracket that attaches to the end of the CU and fastens either directly to the ceiling or to the supplied t-bar hanger.

Item#
Qty/Uom

Manufacturer
Mfg. Part No.
Mfg. Warranty

Description

Wt. (lbs)
Wgt. (kg.)

Price
Log in For
Your Price

445920
1 EACH

Spotwave Wireless
100-10105-01
30 Days

Indoor Ceiling Mounting Kit for the 2500Xe series CU antennas.

1.01
0.46

List

$90.00

Spotwave Passive Extension Antennas

No matter how good the coverage is inside the location, sometimes there are areas that wireless signal cannot reach. Customers can cost effectively complete or extend their coverage footprint of a SpotCell 2500Xe system by taking advantage of the coverage extension port that is available on these products. By adding a passive coverage antenna and cable it is possible to extend the reach of a SpotCell coverage area into areas adjacent to the main coverage area that are shadowed by elevator shafts, firewalls or ductwork or rooms separated from the main coverage area but still require improved coverage (e.g., computer rooms, meeting rooms, executive offices).

Item#
Qty/Uom

Manufacturer
Mfg. Part No.
Mfg. Warranty

Description

Wt. (lbs)
Wgt. (kg.)

Price
Log in For
Your Price

824-1990 MHz Coverage Extension Antenna.

357345
1 EACH

Spotwave Wireless
104-00022-20-01
1 Year

2500Xe passive extension antenna kit. Includes antenna and 25 meters of standard RG6 cable.

3.95
1.80

List

$450.00

330043
1 EACH

Spotwave Wireless
104-00022-18-01
1 Year

SC167/267 series passive extension antenna kit. Includes antenna and 25 meters of standard RG6 cable.

7.40
3.36

List

$450.00

350541
1 EACH

Spotwave Wireless
104-00022-21-01
1 Year

2500Xe passive extension antenna kit. Includes antenna and 25 meters of plenum RG6 cable.

7.35
3.34

List

$989.00

360206
1 EACH

Spotwave Wireless
104-00022-19-01
1 Year

SC167/267 series passive extension antenna kit. Includes antenna and 25 meters of plenum rated RG6 cable.

7.41
3.37

List

$550.00

Hidden Cable DC Injector Kit

When an AC outlet is not convienent to where a coverage antenna is to be mounted, the hidden cable kit will save the day. This kit allows you to insert a DC injector anywhere in the cable line between the donor and coverage antenna (cutting the cable and attaching F male connectors on the exposed ends will be necessary). Order the two F male connectors separately.

Item#
Qty/Uom

Manufacturer
Mfg. Part No.
Mfg. Warranty

Description

Wt. (lbs)
Wgt. (kg.)

Price
Log in For
Your Price

370501
1 EACH

Spotwave Wireless
CUHIDDENCABLEINST
30 Days

Hidden Cable DC Injector Kit

1.13
0.51

List

$90.00

Wi-Ex Ground Kit

When the donor antenna is mounted outdoors, the electrical (or building) code requires that the outer conductor of the coaxial cable be grounded at or near the point of entrance of the cable into the building. The Wi-Ex outdoor grounding kit has all the parts necessary to ground the coaxial cable.

Item#
Qty/Uom

Manufacturer
Mfg. Part No.
Mfg. Warranty

Description

Wt. (lbs)
Wgt. (kg.)

Price
Log in For
Your Price

311838
1 EACH

Wi-Ex
YX012
90 days

Outdoor ground kit consisting of 20' of 10AWG ground wire, 15' of RG6 cable with F male connectors, dual grounding block and 12" grounding strap to attach the ground wire to a cold water pipe.

2.30
1.05

List

$35.50

Spotwave Personality Module

Spotwave personality module is used to reprogram 2500Xe units already installed in the field. These modules are programmed by TESSCO technicians. Supply the Spotwave part number for the new configuration or contact TESSCO technical service for assistance.

Item#
Qty/Uom

Manufacturer
Mfg. Part No.
Mfg. Warranty

Description

Wt. (lbs)
Wgt. (kg.)

Price
Log in For
Your Price

302774
1 EACH

Spotwave Wireless
100-10099-01
1 Year

Blank Personality Module.

0.01
0.00

List

$20.00