Antenna Information:
In order to accurately determine which structure most effectively meets your need, TESSCO must know the antennas that will be on the structure. Without this information, quotes are unlikely to be complete and/or accurate.
Antenna #1
Antenna Manufacturer Model Number / Height / Weight / Type (Dish, Yagi, Omni Dipole, Other) *
Projected Surface Area (sq. feet) *
Transmission Lines: (Qty. and Size [inches]) *
Distance of Stand off (feet): *
Antenna #2
Antenna Manufacturer Model Number / Height / Weight / Type (Dish, Yagi, Omni Dipole, Other)
Projected Surface Area (sq. feet)
Transmission Lines: (Qty. and Size [inches])
Distance of Stand off (feet):
Antenna #3
Antenna Manufacturer Model Number / Height / Weight / Type (Dish, Yagi, Omni Dipole, Other)
Projected Surface Area (sq. feet)
Transmission Lines: (Qty. and Size [inches])
Distance of Stand off (feet):
Antenna #4
Antenna Manufacturer Model Number / Height / Weight / Type (Dish, Yagi, Omni Dipole, Other)
Projected Surface Area (sq. feet)
Transmission Lines: (Qty. and Size [inches])
Distance of Stand off (feet):
Antenna #5
Antenna Manufacturer Model Number / Height / Weight / Type (Dish, Yagi, Omni Dipole, Other)
Projected Surface Area (sq. feet)
Transmission Lines: (Qty. and Size [inches])
Optional Accessories: (Check all that apply)
Other:
Stucture Information, what type of application is the tower being used for? (Check all that apply)
Other:
Additional Information, Comments or Special Requirements:
Is an Engineer's stamp required on foundation drawing?
Contact your local building code authority or permit office to determine if this is required. (Note: if so, a more expensive tower may be required. If answer is yes, and the soil conditions are other than ¿normal Dry Soil¿, then TESSCO will require a Geotechnical Soils Report taken at the site where the tower will be installed. If no geotechnical soils report is provided by the customer, then TESSCO must assume Normal Dry Soil and the customer must bear the full risk of the assumption being incorrect. To mitigate customer risk, TESSCO highly recommends that customers hire a 3rd party geotechnical consultant to conduct a geotechnical soils report. If required, a foundation drawing wet-stamped by a professional engineer may be purchased from TESSCO at an additional fee. This foundation drawing provides only: excavation details, concrete details, quantity and size of rebar, reactions at the base, overturning moment. It does NOT include seismic analysis, detailed rebar drawings or other non-standard foundation requirements. Consult TESSCO if your drawing requires special information at an additional fee.)
Is an Engineer's stamp required on the tower drawing?
Contact your local building code authority or permit office to determine if this is required.
(Note: if so, a more expensive tower is required. This is a 1-page drawing that shows the sections of the tower being stamped from the fdn section to the top. It also states in chart format the exact antennas installed, the exact transmission lines being installed, the wind speed and ice loading at the site and the national standard for which compliance is being wet-stamped by an engineer. In addition a report showing the capacity of tower members is also included. This drawing does NOT provide customers-specific details such as antennas mounting illustrations, grounding details, not other non-standard items.)
