|
 View our entire selection of mobile antennas and amplifiers.
Featured Products and Promotions
Mobile Antennas
New PCTEL 5012D-U GPS Antenna
 The 5012D-U GPS Receiver + Antenna incorporates a highly sensitive 16-channel quick time-to-fix GPS receiver and a high performance active/filtered GPS antenna. It features a GPS engine with embedded flash memory for custom application hosting, WAAS decoder for high-accuracy applications, low-noise amplifier, SAW filter to reject out-of band RF interference and precisely tuned ceramic patch element for maximum GPS signal reception.
The 5012D-U is housed in a compact, rugged, weatherproof magnet/screw mount enclosure with USB (type A) interfacing and is ideal for automotive navigation, fleet management, military, security and public safety mobiles and WiMAX/fixed broadband wireless timing applications.
 Unbreakable Flexi-Whip and Rugged Low Profile GPS in One Antenna
Unbreakable Flexi-whip and rugged GPS low profile in one antenna. Now there is one less antenna to install on your vehicle. The Flexi-whip mast is guaranteed not to break and is field tunable for VHF, UHF, 700 or 800 MHz. The GPS housing and die-cast base will survive the harshest conditions. The solid brass NMO components give optimal conductivity and the Retro-fit GPS base will work with any standard 3/4” portable antenna.
 Larsen GPS Tri Band Now Available with a Magnetic Mount
Larsen is proud to offer a GPS tri band mobile antenna covering 824-960/1710-2710/1575.4 frequencies. The GPSCPMM is an AMPS-GSM/DCS-PCS-UMTS/GPS antenna. This low profile antenna features a strong magnet for quick installation and removal. GPSCPMM antennas operate at either 3 or 5 volt DC.
Multi-Band Features at a Single-Band Price!
 PCTEL’s new GPSGSM multi-band omnidirectional antennas handle Celluar, PCS and GPS frequencies. They are reasonably priced and are ideal for taxi, delivery, or limousine voice, plus navigation and vehicle tracking. Both the magnetic mount and the permanent through-hole models come standard with two, 17' RG-174/U cable with SMA male connectors.
STI-CO Unbreakable Antennas
 The amazing STI-CO Flexi-Whip Antenna features a whip with memory that may bend but will not break. You can tie it in a knot and it will return to its original shape. Eliminate the annoyance of replacing masts.
Flexi-Whips may be cut to cover VHF, UHF, or 800 MHz and anywhere from 136MHz to 1GHz. They are available in standard NMO Roof Mount, Trunk Lip Mount, or Magnet Mount.
Interoperability Antenna Allows for Communication on Three Bands with One Antenna
 STI-CO’s new interoperable mobile antenna is designed to allow the use of VHF, UHF, and 800 MHz mobile radios without installing three antennas on your sedan, SUV, or van. This broadband antenna enables first responders using mobile interconnect transmission systems to communicate with different agencies seamlessly on three different bands. The interoperable mobile antenna mounts quickly and easily with a magnet mount, so there are no holes to drill.
Discrete GPS Antennas Help you Track Assets
 Discrete GPS antennas can assist you with your vehicle, fleet, or asset tracking needs while attracting little attention to themselves. Perfect for covert use, TESSCO’s full line of low-profile GPS antennas includes everything from the traditional hockey-puck version to antennas embedded in transparent film. The GPS antennas can be mounted anywhere from the vehicle roof, under the bumper, or on the vehicle’s glare strip.
4.9 GHz Mobile Solutions
Considerations in Deploying
a Mobile 4.9 GHz Solution
Radios and modems to support the new 4.9 GHz data band are being introduced and TESSCO has the antenna solution to  complete the project. The 4.9 GHz band, available to public safety and authorized critical infrastructure, presents several challenges for mobile environments.
First is loss. At the higher frequencies traditional Motorola style mounts struggle to maintain necessary match tolerances and loss characteristics. To minimize loss, dual shield, solid center RG58/U should be used as the minimum standard. To optimize the match, Motorola mounts need to be rated for high frequencies or a direct radiating element-to-coax transition needs to be utilized.
Second is line-of-sight. The small wavelength of 4.9 GHz means that every effort should be made to keep obstructions out of the transmission path. This is extremely important in the near field. Antennas should be mounted with at least 5 to 7.5 inches of separation (2 – 3 wavelengths) with every attempt made to avoid large objects in the transmission path (light bars on the roof, vehicle cab due to mounting on the trunk).
When it Comes to 4.9GHz Mobile Antennas for Public Safety, TESSCO Has You Covered!
 The 4.9 GHz band has been allocated to public safety for broadband technologies. Communications must be related to the protection of life, health or property. Some typical uses are Wireless LANS for incident scene management, mobile data, mobile data, and setup of temporary hotspots.
TESSCO has the 4.9GHz mobile communication antennas for your needs. From traditional antennas, to small, “thumb-sized” designs, TESSCO has you covered.
 The new MLPV4900NGP from Maxrad offers 3 dBi performance without a ground plane. Mobile Mark offers a magnet mount public safety antenna, the ECOM6-4900, which makes installation easy, or when size is a concern, the MRM3-5500 antenna is only 1.35” tall, and covers 4.9-6.0GHz frequencies.
 Optimize Essential Transmissions on the 4.9 GHz band
Complete your 4.9 GHz projects with mobile antennas. From low-profile to elevated feed versions, TESSCO’s got a wide selection of mobile antennas styles for 4.9 GHz transmission for you to choose from.
Signal Amplifiers
Customize Your Cellular Repeater Installation
 Digital Antenna now offers their award winning cellular repeaters as individual units!
Whether enhancing cell signals inside a home, office, boat or vehicle, you can now easily customize your installation. PowerMax dual band repeaters are available in 40db or 60dB models for use on the 850 and 1900 MHz cellular bands. They feature the latest technology circuitry, FCC and IC type acceptance, high receiver sensitivity and are designed for professional or end user installation.
Small Amplifier Improves Performance
 Don't waste time and energy on dropped calls or interrupted internet sessions. Cell Ranger offers intelligent amplifiers that boost signal strength to your cell phone or laptop air card. They feature a next-generation microprocessor-driven system that gives you reliability and performance enhancements not found with mesh stick-on or “repeater” boosters.
Signal Boost Mobile Amplifier
Significantly Improves Voice and Data Signal Quality
Now in stock from Wilson Cellular – the  Signal Boost mobile amplifier for cellular and PCS phones / data cards. Signal Boost is great for mobile, in-building and marine applications.The universal connector works with any phone or data card. Just add an external mobile antenna and you’re good to go! Choose the Signal Boost amplifier, or the bundled amplifier with external magnetic mount dual-band antenna.
Wilson Cellular Dual-Band Wireless Amplifier Kits!
Make it easier for your customers to get the benefits of a Wilson wireless mobile amplifier system without the hassles of finding the right parts. TESSCO now offers complete Wilson dual-band wireless amplifier solutions. Select the Cellular/PCS dual band wireless in-vehicle bi-directional amplifier and external full-sized magnetic mount antenna or the cellular/PCS dual band wireless in-vehicle bi-directional amplifier and mini magnetic mount antenna bundle. Both kits include the necessary mounts, cables and connectors!
 For more information contact TESSCO
at 866-235-7336 or email us today.
|
|
