After nearly 40 years of input from installation crews, Comsite Hardware Inc. introduces some of the most innovative alternatives to non-penetrating roof mounts, difficult grounding and entry ports.
Featured Products
Patented Roof Mount Saves Your Back
and Your Wallet.
The Quikmount nonpenetrating roof mount is so unique it is patented! The Quikmount utilizes water as ballast, eliminating the cost and hassle of lugging concrete blocks to the roof. The Quikmount II is a smaller version perfect for small broadband wireless antennas. Both sizes limit the weight of any single piece to around 30 pounds so they are easily carried to a roof and quickly assembled by one person. The masts are constructed of lightweight and rust proof aluminum. The lightweight also saves on shipping costs. The Quikmount is shipped in a cardboard box so there is no lumber and plywood to haul away. The plastic base requires no rubber pad to prevent roof damage, saving even more. Cold weather? No problem, just add antifreeze or calcium chloride to the water.
Get a Good Ground at the Most
Difficult Site.
The ComRod ground rod can produce low-ohm readings even in difficult soils. Drop a vertical ComRod in the hole left by the soils test boring or place a horizontal ComRod in a shallow trench. The natural earth salts draw moisture from the atmosphere through the vent holes and gradually leach into the soil to continuously provide a low-resistance ground. The ComRod galvanic backfill contains a portion of bentonite to retain moisture. Unlike pure bentonite, ComRod galvanic backfill does not shrink away from the soil, which reduces efficiency. ComRod galvanic backfill contains materials that actually increase conductivity, enhancing the electrical contact with the earth. Each ComRod comes with a test well and backfill, and is warranted for 20 years!
Cost-Effective Roof Entry System with Built-In Ports
Quikport products are designed with the installer and his wallet in mind. Unlike heavy steel roof cable entries, the lightweight, seamless roof cable entry system cannot rust, and the seamless construction eliminates leakage. The Quikport weights less than half as much as competing products, reducing shipping costs and making it easy to carry to a rooftop. The fully removable top, secured with tamper-resistant screws, eliminates the need to drill a small hole in the side to run cable. The built-in entry ports eliminate an expensive add-on for competing products. Ports are positioned on opposing sides, so bends are no greater than 90 degrees. The 4-inch ports are completely sealed until used, and an adjustable hole saw is provided with each unit to help open the ports to your desired size. The ports accept standard-inch boots (not included). Each unit also comes with two ground bus bars with standoffs. To aid with installation, each Quikport includes a built-in counter flashing
Contact TESSCO at 800-472-7373 or email us with any questions. We look forward to doing business with you!
