Order Now

    Partner With TESSCO

    Value to Customers    Become a Customer    Value to Manufacturers    Become a Manufacturer Partner    Manufacturer Listing    Affinity Services  

    Motorola Canopy Benefits and Specifications

    Benefits

    No Costly Radio Spectrum Licenses

    The Motorola Canopy broadband solution operates in the unlicensed National Information Infrastructure (U-NII) spectrum--5.25 to 5.35 GHz and 5.725 to 5.825 GHz.

    Low Startup Cost

    The Motorola Canopy system's small investment is more affordable than other wireless connectivity options.

    Simple, Fast Deployment and Easy Installation

    Motorola Canopy equipment is streamlined without need for complex infrastructure.

    • No need to run overhead or in-ground wire.   
    • No microwave or software to install.   
    • No need to run through existing phone or cable networks.   
    • Requires no integration with other systems.
    Extremely Robust Against Interference.

    Motorola Canopy wireless broadband employs more local, community-sized cells.

    Simple Modulation Scheme

    Requires limited frequency planning.

    Seamless, Near Plug-and-Play Design and Installation

    Ideal for any business considering entering the wireless ISP arena.

    Scalability and Availability

    Designed for the U-NII band, the Motorola Canopy solution is available throughout the U.S., Canada, Mexico, and many other countries.

    Revenue Creation

    Enables ISPs to provide valuable new services based on bandwidth usage and service level agreements.

    Increased Security

    Per subscriber module authentication helps prevent unauthorized access.

    Specifications

    RF Operational Characteristics
    • Frequency range: 5.25 - 5.35 GHz and 5.75 - 5.85 GHz   
    • Modulation: High Index BFSK (optimized for interference rejection)   
    • Carrier to interference: 3 dB 10-4 dbm   
    • Data rate: 10 Mbps Multipoint, 10 Mbps Backhaul   
    • Operating range: Up to 2 Miles with integrated antenna in 5.2GHz--up to 10 miles with passive reflector in 5.7GHz
    Electrical
    • Power supply: Power over Ethernet (POE); 24 VDC @ 0.3AMP (Active State)   
    • Interface: RJ45 Auto Detect 10/100 BaseT-Half / Full Duplex; Rate Auto Negotiated (802.3 Compliant)
    Environmental
    • Operating temperature: -30ºC to +55ºC (-40ºF to + 131ºF)   
    • Operating humidity: 100% condensing   
    • Wind survival: 190km/hour
    Dimensions
    • 11.75"H x 3.4"W x 1.1"D, 3.4"D (29.9cm x 8.6cm x 8.6cm)   
    • Weight: 0.5 Kg   
    • 5.2 GHz: FCC ID #: ABZ89FC3789   
    • 5.7 GHz: FCC ID #: ABZ89FC4816

    Hardware (no FCC license required for all components)

    1008CK -- Cluster Management Module
    • GPS receiver   
    • Antenna for automatic AP synchronization   
    • Built-in Ethernet switch   
    • AC power supply for 6 Canopy AP Units and 2 Canopy BH Units
    5200AP / 5700AP – Canopy AP Module
    • Measures 11.75" x 3.4" x 3.4"   
    • 10/100baseT Ethernet connection--UL-approved
    5200SM / 5700SM – Canopy SM Module
    • Measures 11.75" x 3.4" x 3.4"   
    • Single cable –  standard RJ45, 8-pin Ethernet   
    • Simple indoor AC adapter--UL-approved
    5700BH –  Canopy Backhaul Module
    • BH Unit @ 5.8 GHz, non-interfering with 5200AP to 5200SM link   
    • 10/100baseT Ethernet connection--UL-approved
    300SS –  Canopy Surge Supressor

    Optional surge suppressor for Ethernet cable connection. Outdoor mountable, and includes connection for a grounding tap.

    Contact TESSCO for more information on Motorola Canopy at 1-866-817-5369 or canopy@tessco.com.




    Motorola is registered with the U.S. Patent Office. Canopy is a trademark of Motorola, Inc.

     

    Back to Top