Advanced Search
S3A-LDA 60-ft Series 1 Self-Supporting Tower
Sabre - S3A LDA - S3A-LDA 60-ft Series 1 Self-Supporting Tower
TESSCO SKU : 366363 Mfg Part #: C05-109-106 Qty/UOM : 1 EACH UPC: 888063663635
The C05-109-106 LDA Series 1 60-ft self-supporting tower from Sabre Site Solutions is designed per ANSI/TIA/EIA-222-G-2005. This model LDA C05-109-106 tower is a three-legged self-supporting structure comprised of all-angle knock-down leg and bracing sections. All steel parts are completely hot-dip galvanized to ensure uncompromising corrosion protection in even the most severe climates.

The C05-109-106 tower kit includes the main tower hardware only and consists of the tower legs, diagonals, splice plates, and connection hardware. This tower is designed for use with both base shoe anchor bolt and embedded section type foundations. Foundation materials are ordered separately.

Normal soil foundation designs are found below in the Attachments section. Geotechnical surveys are always recommended prior to any tower installation. If you would like for TESSCO to recommend a tower for your particular application please fill out and submit a TESSCO Tower Design Questionnaire.

If you choose to purchase a tower from TESSCO (as a kit or in parts) without submitting a TESSCO Tower Design Questionnaire, you do so at your own risk. TESSCO is not responsible for the subsequent success or failure of your tower installation or damages that may result from improper installation or overloading. In other words, if you're not sure which tower you need fill out the TESSCO Tower Design Questionnaire and we'll help you.

Your Price: Log in

Qty: 

Add

View Worksheet

Tower Height60 ft
Tower SeriesSeries 1
Leg TypeAngle
Leg ConnectionBolted splice plates
EngineeringPre-engineered
Climbing ApplicationStep bolts
Tower TypeSelf-Supporting
Mfg. Warranty1 Year
The Sabre S3A Series LDA pre-engineered self-supporting tower will change the way you think about pre-engineered towers. The LDA is simple-to-erect and strong enough to handle even the most demanding loads. And with seven different series from which to choose, there's sure to be an LDA model to suit your project needs. The S3A Series LDA towers are available in heights from 20 to 150-ft.

All towers are designed per ANSI/TIA/EIA-222-G-2005. The LDA is a three-legged self-supporting tower constructed of all-angle knock-down leg and bracing sections. All steel parts are hot-dip galvanized to ensure uncompromising integrity in even the most severe climates.

The effects of torsion have not been considered in the EPA values shown. These EPA values are correct for symmetrically loaded instances where torque is not present (such as one top mounted antenna at the center of the tower, or three leg mounted panel antennas symmetrically mounted around the tower). Should torque be present, the allowable EPA value shown will be reduced and in some cases this reduction may be significant. Please consult your TESSCO representative to determine if torque need be considered and how much the allowable EPA value will be reduced due to its inclusion.

Materials that are included with each structure include tower legs, diagonals, splice plates, and connection hardware. Foundation materials are ordered separately. In order to determine the proper foundation design and materials it is important that you consult with your TESSCO sales representative prior to placing your order.


  • Tower designs are in accourdance with ANSI/TIA/EIA-222-F-1996 or ANSI/TIA-222-G-2-2009
  • Design assumes a dead weight of 100-lbs and center of EPA applied at 1-ft above the top of the tower
  • ANSI/TIA/EIA-222-F-1996 and ANSI/TIA-222-G-2-2009 recommend that designs be evaluated by a registered professional engineer for each specific application
  • Design assumes a total of (6) ½-in lines with (2) lines bundled directly to each tower leg
  • All antenna installations must be grounded in accordance with local and national codes
  • Tower is designed for optional step bolts on (1) leg alternated vertically on 1-ft 3-in centers. Step bolt option must be purchased seperately
  • Tower materials include tower legs, diagonals, splice plates, and hardware. Foundation materials ordered seperately.
  • An EPA value of "-" indicates design does not satisfy requirements of the standard for this configuration.

Optional Accessories
  • Step Bolts
  • Tower Safety Climb System
  • Grounding Kits
  • Antenna Mounts

Clicking on a link will search for accessories by the brand and model

 File TypeNameFile SizeLast Updated
ImagepdfSeries LDA Self-Supporting Tower Profile107.64 KB12/15/2016
ImagepdfSabre Series LDA Tower Profiles - 60-ft928.53 KB12/15/2016
ImagepdfNormal Soil Anchor Bolt Foundation148.31 KB12/15/2016
ImagepdfNormal Soil Embedded Section Foundation129.20 KB12/15/2016
 
Custom Foundation Design
TESSCO 329743
Custom Foundation Design
Sabre
TPS0004

Your Price: Log in

 
QTY
S3A-LDA 20-ft Series 1 Self-Supporting Tower
TESSCO 356240
S3A-LDA 20-ft Series 1 Self-Supporting Tower
Sabre
C05-109-102

Your Price: Log in

 
QTY
S3A-LDA 40-ft Series 1 Self-Supporting Tower
TESSCO 356554
S3A-LDA 40-ft Series 1 Self-Supporting Tower
Sabre
C05-109-104

Your Price: Log in

 
QTY
S3A-LDA 50-ft Series 4 Self-Supporting Tower
TESSCO 336598
S3A-LDA 50-ft Series 4 Self-Supporting Tower
Sabre
C05-109-405

Your Price: Log in

 
QTY
S3A-LDA 100ft Series 1 Self-Supporting Tower
TESSCO 326513
S3A-LDA 100ft Series 1 Self-Supporting Tower
Sabre
C05-109-110

Your Price: Log in

 
QTY
S3A-LDA 100ft Series 7 Self-Supporting Tower
TESSCO 326666
S3A-LDA 100ft Series 7 Self-Supporting Tower
Sabre
C05-109-710

Your Price: Log in

 
QTY
S3A-LDA 120ft Series 7 Self-Supporting Tower
TESSCO 356326
S3A-LDA 120ft Series 7 Self-Supporting Tower
Sabre
C05-109-712

Your Price: Log in

 
QTY