ROHN’s complete guyed tower kits make it easier than ever for you to get everything you need for your next tower installation. The Rohn R-65G90R400 400 ft guyed tower kit contains all hardware necessary to construct a complete 400 ft guyed tower suitable for use in areas with 90 mph Rev G / 70 mph Rev F wind speeds. See recommended maximum loadings below. The tower kit includes: BRBROne (1) 10 ft tapered baseBR One (1) 10 ft standard 65G sectionBR Nineteen (19) standard 20 ft 65G tower sectionsBR One (1) top-mounted beacon plate kitBR Two (2) beacon leg mountsBR Seven (7) guy bracket assemblies with hardwareBR (1625 ft) 3/8 in EHS guy strandBR (1475 ft) 5/16 in EHS guy strandBR (4300 ft) 1/4 in EHS guy strandBR Thirty (30) 1/4 in dead-end gripsBR Six (6) 5/16 in dead-end gripsBR Six (6) 3/8 in dead-end gripsBR Six (6) heavy-duty thimbles for 3/8 in guy strandBR Six (6) heavy-duty thimbles for 5/16 in guy strandBR Thirty (30) heavy-duty thimbles for 1/4 in guy strandBR Twelve (12) 5/8 in x 12 in eye and jaw turnbucklesBR Nine (9) 1/2 in x 12 in eye and jaw turnbucklesBR Six (6) anchor rod assembliesBR Two (2) anchor grounding kitBR Three (3) base grounding kitsBR Six (6) grounding lugsBR Six (6) turnbuckle safety cablesBR One (1) pier pinBRBRNormal soil foundation designs are found below in the Attachments section. Geotechnical surveys are always recommended prior to any tower installation. TESSCO recommends that you please fill out and submit a A HREF="https://www.tessco.com/customer-service/forms/tower-design-request-form" target="_blank"TESSCO Tower Design Questionnaire/A so that we can be sure to recommed the best tower for your particular application.