ROHN’s complete guyed tower kits make it easier than ever for you to get everything you need for your next tower installation. The Rohn R-65G90R500 500 ft guyed tower kit contains all hardware necessary to construct a complete 500 ft guyed tower suitable for use in areas with 90 mph Rev G / 70 mph Rev F wind speeds. See recommended maximum loadings below. The tower kit includes: BRBR One (1) 10 ft tapered baseBR One (1) 10 ft standard 65G sectionBR Twenty-four (24) standard 20 ft 65G tower sectionsBR One (1) top-mounted beacon plate kitBR Two (2) beacon leg mountsBR Eight (8) guy bracket assemblies with hardwareBR (2025 ft) 3/8 in EHS guy strandBR (7450 ft) 5/16 in EHS guy strandBR (115 ft) 1/4 in EHS guy strandBR Twelve (12) 1/4 in dead-end gripsBR Thirty (30) 5/16 in dead-end gripsBR Six (6) 3/8 in dead-end gripsBR Six (6) heavy-duty thimbles for 3/8 in guy strandBR Thirty (30) heavy-duty thimbles for 5/16 in guy strandBR Twelve (12) heavy-duty thimbles for 1/4 in guy strandBR Nine (9) 5/8 in x 12 in eye and jaw turnbucklesBR Fifteen (15) 3/4 in x 12 in eye & jaw turnbucklesBR Six (6) anchor rod assembliesBR Two (2) anchor grounding kitBR Three (3) base grounding kitsBR Six (6) grounding lugsBR Six (6) turnbuckle safety cablesBR One (1) pier pinBRBRNormal soil foundation designs are found below in the Attachments section. Geotechnical surveys are always recommended prior to any tower installation. TESSCO recommends that you please fill out and submit a A HREF="https://www.tessco.com/customer-service/forms/tower-design-request-form" target="_blank"TESSCO Tower Design Questionnaire/A so that we can be sure to recommed the best tower for your particular application.