GSA | |
DC Input Voltage | 12 V
|
DC Input Voltage Range | 11-14 V
|
Connections | +/- screw terminals
|
Maximum Continuous Amperage | 30 A
|
Maximum Intermittent Amperage | 30 A
|
Ground Polarity | Negative
|
Isolated | Yes
|
Spike Protection | yes
|
Item Height | 1.125 in
|
Item Width | 3.75 in
|
Depth | 3 7/8
|
Delay Time | From 5 seconds to Infinity
|
Mfg. Warranty | 3 Years
|
ChargeGuard Select is an automatic on/off timer switch for two way radios, mobile data terminals, laptop computers etc. Easy to install, compact, rugged and dependable. Automatically turns mobile equipment on when you start the motor. When you turn the motor off, the equipment stays on from 5 seconds to infinity depending on the selected time delay setting (default setting is two hour delay). Wires directly to the battery or ignition switch. Features include:
- Low Voltage (11V)/ High Voltage (18 V) Protection
| - Selectable Time delay; 5 seconds to eternity
|
- Outside Connection offers: Engine sense separated from BAT Lug; High/Low switched DC trigger input; Pre-warning output signal for computers
| - 30 Amp Load current rating
|
- 5 mA Stand-By Current, Operating current 80 mA
| - Reverse Polarity Protection
|
- Emergency override button provides 15 min of electronics power
| - Dimensions: 4" x 3.75" x 1.125"
|
- Voltage diagnostic LED indicates stats with color/blink codes
| - Easy-open, splashproof access door
|
| - Choise of sensing modes: Automatic Detection, Battery Sensing (DC Rise), or Ignition
|
Clicking on a link will search for accessories by the brand and model