55G 180 ft Guyed Tower Kit
ROHN’s complete guyed tower kits make it easier than ever for you to get everything you need for your next tower installation. The Rohn R-55G110R180 180 ft guyed tower kit contains all hardware necessary to construct a complete 180 ft guyed tower suitable for use in areas with 110 mph Rev G / 90 mph Rev F wind speeds. See recommended maximum loadings below. The tower kit includes: BRBREighteen (18) standard 10 ft 55G tower sectionsBR One (1) concrete base plateBR One (1) top plateBR Five (5) guy bracket assemblies with hardwareBR (1550 ft) 3/16 in EHS guy strandBR (1375 ft) 1/4 in EHS guy strandBR (18) 3/16 in dead-end gripsBR Twelve (12) 1/4 in dead-end gripsBR Eighteen (18) heavy-duty thimbles for 3/16 in guy strandBR Twelve (12) heavy-duty thimbles for 1/4 in guy strandBR Twelve (12) 5/8 in x 12 in eye and jaw turnbucklesBR Three (3) anchor rod assembliesBR One (1) anchor grounding kitBR Three (3) base grounding kitsBR Three (3) grounding lugsBR Three (3) turnbuckle safety cablesBR One (1) pier pin
Geotechnical surveys are always recommended prior to any tower installation. If you would like for TESSCO to recommend a tower for your particular application please fill out and submit a Tower Calculation Request Form. If you choose to purchase a tower from TESSCO (as a kit or in parts) without submitting a Tower Design Questionnaire, you may do so at your own risk.
TESSCO is not responsible for the subsequent success or failure of your tower installation or damages that may result from improper installation or overloading. In other words, if you're not sure which tower you need fill out the Tower Calculation Request Form and we'll help you.
