65G 340 ft Guyed Tower Kit

ROHN’s complete guyed tower kits make it easier than ever for you to get everything you need for your next tower installation. The Rohn’s R-65G110R340 340 ft guyed tower kit contains all hardware necessary to construct a complete 340 ft guyed tower suitable for use in areas with 110 mph Rev G / 90 mph Rev F wind speeds. See recommended maximum loadings below. The tower kit includes: BRBR One (1) 10 ft tapered baseBR One (1) 10 ft standard 65G tower sectionBR Sixteen (16) standard 20 ft 65G tower sectionsBR Six (6) guy bracket assemblies with hardwareBR One (1) leg-mounted beacon plate kitBR (2600 ft) 3/8 in EHS guy strandBR (2600 ft) 5/16 in EHS guy strandBR (350 ft) 1/4 in EHS guy strandBR Twelve (12) 3/8 in dead-end gripsBR Eighteen (18) 5/16 in dead-end gripsBR Six (6) 1/4 in dead-end gripsBR Twelve (12) heavy-duty thimbles for 3/8 in guy strandBR Eighteen (18) heavy-duty thimbles for 5/16 in guy strandBR Six (6) heavy-duty thimbles for 1/4 in guy strandBR Twelve (12) 3/4 in x 12 in eye and jaw turnbucklesBR Six (6) 5/8 in x 12 in eye and jaw turnbucklesBR Six (6) anchor rod assembliesBR Two (2) anchor grounding kitBR Three (3) base grounding kitsBR Six (6) grounding lugsBR Six (6) turnbuckle safety cablesBR One (1) pier pin

Geotechnical surveys are always recommended prior to any tower installation. If you would like for TESSCO to recommend a tower for your particular application please fill out and submit a Tower Calculation Request Form. If you choose to purchase a tower from TESSCO (as a kit or in parts) without submitting a Tower Design Questionnaire, you may do so at your own risk.

TESSCO is not responsible for the subsequent success or failure of your tower installation or damages that may result from improper installation or overloading. In other words, if you're not sure which tower you need fill out the Tower Calculation Request Form and we'll help you.

e to recommed the best tower for your particular application.