65G 460 ft Guyed Tower Kit
ROHN’s complete guyed tower kits make it easier than ever for you to get everything you need for your next tower installation. The Rohn R-65G90R460 460 ft guyed tower kit contains all hardware necessary to construct a complete 460 ft guyed tower suitable for use in areas with 90 mph Rev G / 70 mph Rev F wind speeds. See recommended maximum loadings below. The tower kit includes: BRBROne (1) 10 ft tapered baseBR One (1) 10 ft standard 65G sectionBR Twenty-two (22) standard 20 ft 65G tower sectionsBR One (1) top-mounted beacon plate kitBR Two (2) beacon leg mountsBR Eight (8) guy bracket assemblies with hardwareBR (1850 ft) 3/8 in EHS guy strandBR (6850 ft) 5/16 in EHS guy strandBR (1025 ft) 1/4 in EHS guy strandBR Twelve (12) 1/4 in dead-end gripsBR Thirty (30) 5/16 in dead-end gripsBR Six (6) 3/8 in dead-end gripsBR Sixty (60) heavy-duty thimbles for 3/8 in guy strandBR Three (3) heavy-duty thimbles for 5/16 in guy strandBR Twelve (12) heavy-duty thimbles for 1/4 in guy strandBR Nine (9) 5/8 in x 12 in eye and jaw turnbucklesBR Fifteen (15) 3/4 in x 12 in eye and jaw turnbucklesBR Six (6) anchor rod assembliesBR Two (2) anchor grounding kitBR Three (3) base grounding kitsBR Six (6) grounding lugsBR Six (6) turnbuckle safety cablesBR One (1) pier pin
Geotechnical surveys are always recommended prior to any tower installation. If you would like for TESSCO to recommend a tower for your particular application please fill out and submit a Tower Calculation Request Form. If you choose to purchase a tower from TESSCO (as a kit or in parts) without submitting a Tower Design Questionnaire, you may do so at your own risk.
TESSCO is not responsible for the subsequent success or failure of your tower installation or damages that may result from improper installation or overloading. In other words, if you're not sure which tower you need fill out the Tower Calculation Request Form and we'll help you.
